Table of Contents
Advertisement
User Manual of DS-9600/8600/7700/7600 Series NVR
14.5.3 Editing a User
Steps:
1.
Enter the User Management interface.
Menu >Configuration>User
2.
Select the user to be edited from the list, as shown in Figure 14. 9.
3.
Click the
icon to enter the Edit User interface, as shown in Figure 14. 10.
Note:
The admin user can also be edited.
4.
Edit the corresponding parameters.
•
Operator and Guest
You can edit the user information, including user name, password, permission level and MAC address.
Check the checkbox of Change Password if you want to change the password, and input the new one in
the text field of Password and Confirm.
•
Admin
You are only allowed to edit password and MAC address. Check the checkbox of Change Password if
you want to change the password, and the input the correct old password, and the new one in the text field
of Password and Confirm.
5.
Click the OK button to save the settings and exit the menu.
Operator and Guest
Admin
Figure 14. 10 Edit User Interface
213
Hide quick links:
Advertisement
Table of Contents
