Customizing Patrols - HIKVISION DS-8600 User Manual

User Manual of DS-9600/8600/7700/7600 Series NVR
2. Choose Camera in the list on the menu.
3. Double click the preset in the Preset list to call it.

4.2.3 Customizing Patrols

Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in Customizing Presets.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select patrol number in the drop-down list of patrol.
3. Select the under Patrol option box to add key points for the patrol.
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the
PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to
the next.
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
Figure 4. 6
PTZ- Add Key Point
Figure 4. 7
Key point Configuration
58