Table of Contents
Advertisement
User Manual of DS-9600/8600/7700/7600 Series NVR
6.2 Auxiliary Functions of Playback
6.2.1 Playing Back Frame by Frame
Purpose:
Play video files frame by frame, in case of checking image details of the video when abnormal events happen.
Steps:
•
Using a Mouse:
Go to Playback interface.
If you choose playback of the record file: click button
on the playback screen represents playback of one frame.
If you choose reverse playback of the record file: click button
one click on the playback screen represents reverse playback of one frame. It is also feasible to use button
toolbar.
•
Using the Front Panel:
Rotate and hold the outer ring on Jog Shuttle counter clockwise (for DS-7700/8600NI-ST only) or click the
button to set the speed to Single frame. One click on
button on the front panel represents playback or reverse playback of one frame.
6.2.2 Smart Search
Purpose:
In order to locate motion detection event easily and accurately in the playback progress bar, you are allowed to
analyze a certain area (scene) dynamically, and to get all of the related motion detection events that occurred in
this area.
Note:
The smart search function varies according to the camera connected to the NVR.
Before you start:
1. Log in the network camera by the web browser, and enable the Dynamic Analysis for Motion by checking
the checkbox of it. You may enter the motion detection configuration interface by Configuration>
Advanced Configuration> Events> Motion Detection.
2. Enable the motion detection function and set the arming area to the full screen in the NVR local menu.
Please refer to chapter 5.3 for details.
Steps:
1. Enter the Playback interface and play a record file. Refer to Chapter 6.1.1 for the detailed information about
searching and playback of the record files.
until the speed changes to Single frame and one click
until the speed changes to Single frame and
button, one click on the playback screen or Enter
95
in
Hide quick links:
Advertisement
Table of Contents
