Light Bulb Replacement - Cal Flame BBQ08873P Owner's Manual

22

Light Bulb Replacement

WARNING: Never attempt to replace a light bulb
when the grill is in use. Serious burns will result.
WARNING: Never touch halogen bulbs with your
bare fingers. Use a tissue or a small piece of paper
to handle bulbs. Oils from your hands will damage
halogen bulbs.
Light Removal
1. Open the grill hood and locate the glass light
covers at the back of the grill.
2. Remove the screw at the left or right of the
lens.
3. Carefully pull the lens away and out of the
light fixture. Set the lens, screw clip, and screw
aside.
3. Unscrew the two screws located at the side of
the white ceramic light fixture.
4. Using a tissue or small piece of paper, pull the
burnt bulb out of the socket.
Light Replacement
1. Using a tissue or small piece of paper, carefully
push a new bulb into the socket, making sure
both wires on the bulb go into the light socket
evenly.
2. Tighten the two screws on the side white ceramic
light fixture.
3. Replace the light lens by replacing the screw and
screw clip.
www.calflamebbq.com
2010 Barbecue Grills
LTR20101038, Rev. A