Installation Guidelines - DVDO iScan Duo Owner's Manual

Installation Guidelines

The iScan Duo installation guidelines below ensure optimal performance.
Do . . .
• Install the iScan Duo on a solid, flat, level surface such as a table or shelf. You can also
install the iScan Duo in a standard 19" equipment rack using the supplied rack-mount kit.
• Select a dry, well-ventilated location.
• Use only the included external power supply.
• Avoid excessive humidity, sudden temperature changes or temperature extremes.
• Use only accessories recommended by DVDO to avoid fire, shock or other hazards.
• Unplug the iScan Duo before cleaning. Use a damp cloth for cleaning.
Don't . . .
• Stack the iScan Duo directly above heat-producing equipment such as power
amplifiers or other components that generate heat during use.
• Expose the iScan Duo to high temperatures, humidity, steam, smoke, dampness,
or excessive dust. Avoid installing the iScan Duo near radiators and other heat
producing appliances.
• Install the iScan Duo near unshielded TV or FM antennas, cable TV decoders, and
other RF -emitting devices that might cause interference.
• Place the iScan Duo on a thick rug or carpet or cover the iScan Duo with cloth.
This might prevent proper cooling.
• Attempt to service this unit. Instead, disconnect it and contact your Authorized DVDO
Reseller or DVDO directly.
• Open or remove unit panels or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards.
It may also cause damage to your iScan Duo.
6