DVDO iScan Duo Quick Start Manual
Dual output high-definition video processor
Hide thumbs
Also See for iScan Duo:
- Owner's manual (42 pages) ,
- Owner's manual supplement (15 pages) ,
- Owner's manual (16 pages)
Advertisement
Quick Links
Unpack the box
Remove the components and iScan Duo from the box.
Save the packing materials in case you need them later.
Review the documentation for important information.
Notice: The information contained on this Quick Start card, including but not limited to any product specifi cations, is subject to change without notice.
Check the components
•
iScan Duo Video Processor
•
Universal 12V@5A AC-to-DC Power Converter
•
US IEC Power Cord (International Customers, consult your local authorized DVDO reseller)
•
Remote Control
•
iScan Duo Owner's Manual
•
Serial Cable for Automation
•
Rackmount Kit
•
Std-A plug to Mini-B plug 5-pin USB cable
If any items are missing or damaged, please notify your dealer immediately.
Q U I C K
S T A R T
G U I D E
DUAL OUTPUT HIGH-DEFINITION VIDEO PROCESSOR
Advertisement
Related Manuals for DVDO iScan Duo
Summary of Contents for DVDO iScan Duo
- Page 1 Check the components • iScan Duo Video Processor • Universal 12V@5A AC-to-DC Power Converter • US IEC Power Cord (International Customers, consult your local authorized DVDO reseller) • Remote Control • iScan Duo Owner’s Manual • Serial Cable for Automation •...
- Page 2 Plug the small connector attached to the cable that comes out of the power supply into your iScan Duo. Your iScan Duo should power on and display iScan Duo — DVDO on the FPD. The Status LED on your iScan Duo will turn red indicating that there are no active inputs detected.
-
Page 3: Troubleshooting
Duo? Restore the iScan Duo to its factory default state. The Status LED on the iScan Duo will blink blue if it is processing an HDCP protected signal on its HDMI inputs and it is unable to authenticate with a.
Need help?
Do you have a question about the iScan Duo and is the answer not in the manual?
Questions and answers