DVDO iScan Duo Owner's Manual page 10

[1] POWER
[2] STANDBY
[3] P1-P4
[4] TEST PATTERNS
[5] OUTPUT SELECT
[6] SHIFT
[7] STRETCH
[8] 16:9
[9] 4:3
[10] ACTIVE
[11] PRESETS
[12] MENU
[13] EXIT
t u p q
[14] ENTER
[15] ZOOM p q
[16] INFO
p q
[17] USER
[18] Input Select buttons These buttons directly select the input on the iScan Duo.
5
Always turns on the iScan Duo
Always puts the iScan Duo in standby mode
Reserved for future use
ON/OFF : Turns Test Patterns On or Off
u
: Selects the next test pattern
t
: Selects the previous test pattern
AUDIO : Selects audio output (HDMI Video, HDMI Audio, Optical/Coax)
VIDEO : Selects video output (HDMI1, HDMI2)
PROFILES : Reserved for future use
Press this button followed by navigation
Press this button followed by navigation
p q
image horizontally or
Sets the aspect ratio of the input image to 16:9 (Full Frame)
Sets the aspect ratio of the input image to 4:3 (Full Frame)
Selects active format aspect ratio i.e. the actual aspect ratio of the
content. For example, typical movie aspect ratios are 1.85:1 or 2.35:1
Selects preset aspect ratios including 16:9 (Full Frame), 4:3 (Full Frame),
4:3 Letterbox and Panorama
Use this button to access the on-screen main menu
Use this button to exit the current menu or the exit the on-screen menu
Menu Navigation buttons. Press ENTER to confirm a selection or to
enter a new menu
Use these buttons to magnify an input image while maintaining its
aspect ratio
Use this button and the navigation
information about the iScan Duo's status and settings
Reserved for future use
Note: VIDEO 1 and VIDEO 2 are multi-function buttons. They select
Video 1 and Video 2 inputs respectively by default. However, if RGBS
is selected through the on-screen menu, the video input function is
disabled and the input becomes the sync (S) input for RGBS.
AUTO automatically selects an active input based on priority set by
the user. See Configuration Section under Input Priority on page 20.
t u p q
buttons to move the input image
t u buttons to stretch the input
buttons to stretch the input image vertically
t u p q
buttons to display useful