DVDO iScan Duo Owner's Manual page 30

D V D O I S C A N D U O
O W N E R ' S M A N U A L S U P P L E M E N T
F i rmwa re Vers i on 2 .3 0 (Bu ild 7 9)
This document is a supplement to the iScan Duo Owner's Manual and describes features, improvements
and bug fixes in the newest firmware release. Changes from previous releases are included as well.
NOTE: This release will force a Factory Default
NEW FEATURES
1. 3D Pass-through
The iScan Duo will pass-through 3D content from a 3D source to a 3D display. This happens
automatically. The LED indicator will be green to indicated pass-through.
Known issues: Some PC 3D cards and the DPI Titan Reference 3D projector are not
compatible with this release.
2. Simultaneous Dual Video Outputs
The iScan Duo will output video on both HDMI A/V outputs simultaneously with this release.
When dual output mode is activated, the primary video output is selected using the Output
Select menu. For example, if the primary output is HDMI A/V 2, the secondary output, when
activated will be HDMI A/V 1.
A new menu item is added in the Output Setup menu
Main Menu
Off
On
The secondary output always follows the resolution and other format characteristics of the
primary output including audio. The secondary output is also not deep color to ensure
maximum compatibility.
3. Day and Night Modes
Added CMS Day and Night profile selection to support Day and Night modes. The P1 button on
the remote toggles between Day and Night mode.
Day and Night profiles are selected using Profile Select sub-menu
Main Menu
Day
Night Select Night mode
IMPROVEMENTS
• Created a CMS sub-menu in the On-Screen Display to the simplify menu structure.
• Two identical displays can be connected and separately calibrated.
• Added new standard output format "WUXGA@60Hz" (1920x1200).
BUG FIXES
• User Preset previously affected other standard Input AR Presets.
• Gray scale pattern could be set to wrong IRE level when changing from gamut menu to
gray scale menu.
• Slightly inaccurate coefficients were used in color space conversion and non-video levels
were clipped.
25
_ _
Output Setup
Secondary output is not activated
Secondary output is activated
_ _
Output Setup
Select Day mode
Second Output
_
CMS Profile Select