S E C T I O N 4 - M E N U O P T I O N S; Input Select; Output Select; Input Aspect Ratio - DVDO iScan Duo Owner's Manual

S E C T I O N 4 – M E N U O P T I O N S
This section describes iScan Duo's On-Screen Menu which is activated when the user presses
MENU on the remote or front panel.

Input Select

There are fifteen video inputs on the iScan Duo:
• VIDEO 1 - Composite Video/Sync
• VIDEO 2 - Composite Video/Sync
• VIDEO 3 - Composite Video/Sync
• S-VIDEO - S-Video or Y/C
• COMPONENT 1 - Component/RGBS 1
• COMPONENT 2 - Component/RGBS 2
• VGA - PC Input
• HDMI 1 - 8
• AUTO - Automatic active input detection and selection
These inputs can also be accessed using the direct access buttons on the remote

Output Select

This menu selects one of the iScan Duo's two HDMI video outputs
HDMI A/V 1 Selects HDMI video output 1 (default)
HDMI A/V 2 Selects HDMI video output 2
The HDMI video output selection can also be made using the VIDEO button on the Output Select
section of the remote control. This button will toggle between the two HDMI video outputs. If there
is only one display connected to the iScan Duo, it will not switch the video output.

Input Aspect Ratio

This menu controls the aspect ratio settings of the iScan Duo's inputs.
•

Picture (Aspect Ratio)

DVDs today are mostly encoded in 16:9 aspect ratio which is sometimes referred to as
'anamorphic' or 'enhanced for widescreen TV's'. Some older DVDs are encoded in 4:3 aspect
ratio. Standard definition (SD) broadcasts, and older legacy SD content also have 4:3
picture aspect ratio. High definition (HD) content has 16:9 aspect ratio.
12