This control is available in the Input Adjust menu:
On (default) The iScan Duo sets its input as HDCP capable.
Off
5. New Configuration Control
A menu item was added to allow users to control the OSD display.
5.1 Menu Timeout
The OSD menu timeout determines the time (in seconds) it takes for the iScan Duo to close
the OSD menu after no action has been performed. The user can now control the duration
of the timeout.
This control is available in the Configuration menu:
40 sec (default)
160 sec.
Off
6. New Output Setup Controls
Several menu items were added to improve compatibility and display of border and mask levels.
6.1 Border Level
A border is created when the active aspect ratio of the input does not match the display
aspect ratio. For example, if the active aspect ratio is 4:3 and the display aspect ratio is
16:9 the iScan Duo creates a left and right border on the resulting image. The border level
can now be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar control.
The default setting is 0 IRE.
This control is available in the Output Setup menu:
6.2 Mask Level
A mask is created when Underscan feature which reduces the output image size to less than
the maximum display size. Typically Underscan is used if the image goes beyond the display.
The mask level can be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar
control. The default setting is 0 IRE.
This control is available in the Output Setup menu:
6.3 Output HDCP
HDMI displays or other devices (such as HDMI splitters, AV Receivers) may have different
HDCP implementations. The output HDCP Mode control is added to accommodate the large
number of HDMI devices that connect to the iScan Duo's outputs.
This control is available in the Output Setup menu:
31
_
Main Menu
Input Adjust
Sources can send content protected audio/video signals to the input.
The iScan Duo turns off HDCP on its input. This feature speeds up the
iScan Duo's ability to lock onto an input signal when HDCP is not needed.
_
Main Menu
Configuration
On-screen menu times out after 40 seconds
On-screen menu times out after 160 seconds
On-screen menu never times out.
_
Main Menu
Output Setup
_
Main Menu
Output Setup
_
Main Menu
Output Setup
_
HDCP Mode
_
Menu Timeout
_
Border Level
_
Mask Level
_
HDCP Mode
Need help?
Do you have a question about the iScan Duo and is the answer not in the manual?