Video Level; Deep Color; Audio Output; Configuration - DVDO iScan Duo Owner's Manual

•

Video Level

This control is similar to the Video Level control in the Input Adjust menu but applies to the
iScan Duo's output.
Auto
Video
Computer
•

Deep Color

The iScan Duo supports Deep Color displays. These displays support 30-bit or 36-bit inputs.
If the display connected to the iScan Duo supports Deep Color, the iScan Duo's output can
be configured as follows.
Off The iScan Duo will not output Deep Color format (default mode).
Auto The iScan Duo will output the display's preferred Deep Color format.
30-bit The Scan Duo will output 30-bit Deep Color format.
36-bit The Scan Duo will output 36-bit Deep Color format.
•

Audio Output

The iScan Duo can output audio on one of the following connectors: HDMI Video 1, HDMI
Video 2, HDMI Audio, Optical.
Auto Select
The choice of output depends on what components are connected to the outputs
and powered up.
Video HDMI Use this setting if you want to send audio to your video display's speakers.
Audio HDMI Use this setting if you have an AV Receiver with an HDMI input.
Optical
The table below shows the connector choice for audio when Auto Select is chosen.
Output Connector
Audio HDMI
Video HDMI
Optical

Configuration

This menu provides system level controls of the iScan Duo
•

Input Priority

Input Priority selects which input to use when multiple inputs are active at the same time and
Input Select is set to Auto. The selection is based on priority.
To change priority of selection with the remote control:
Use the navigation
Press ENTER to select the input
Use the navigation
Press ENTER again to choose another input
The iScan Duo outputs the video level reported by the display.
The iScan Duo outputs 'video' signal level to the display.
The iScan Duo outputs 'computer' signal level to the display.
The iScan Duo will automatically route audio to an audio output.
Use this setting if you have an AV Receiver without HDMI inputs.
Conditions
A/V Receiver with HDMI inputs is connected to the Audio HDMI port.
HDMI Display has audio capability (reported via the EDID).
No A/V Receiver is connected to the Audio HDMI port, or an AV Receiver
is connected but powered off.
Display does not have audio capability (reported via the EDID).
No A/V Receiver is connected to the Audio HDMI port, or it is powered off.
p q
and buttons to move to input you want to change
p and q buttons to move the input to the desired priority
20