Table of Contents
Advertisement
Curtain Button
The iscan Vp50
remote has a Curtain button which allows you to close a 'curtain' over the image.
pro
This feature is especially useful when an image is paused on a display susceptible to burn-in or a tran-
sition while switching inputs as part of a macro on a universal remote or automation system.
Discrete IR Codes and Serial Automation Protocol
Almost all commands that are available in the On Screen Display can be executed discretely using a
programmable ir remote control or automation system connected via an rs232 serial connection.
These codes are available at www.anchorbaytech.com
Non-Volatile Memory Settings
The iscan Vp50
stores a variety of user settings in non-volatile memory. non-volatile memory
pro
retains its contents when power is lost. There is one group of system settings and one group of user
settings.
Installation Guidelines
Take special care with the iscan Vp50
tion to the bulleted items that begin below and to other precautions that appear throughout this guide.
Do . . .
•
install the iscan Vp50
You can also install the iScan VP50
rack-mount kit available from authorized DVDO resellers or directly from DVDO.
•
select a dry, well-ventilated location.
•
Use only the included external power supply.
•
Avoid excessive humidity, sudden temperature changes or temperature extremes.
•
Use only accessories recommended by the manufacturer to avoid fire, shock or other hazards.
•
unplug your Vp50
Don't . . .
•
install the iscan Vp50
four of its feet, unless it is installed in an equipment rack.
•
stack the iscan Vp50
amplifiers or other components that generate heat during use.
•
Expose the iScan VP50
or excessive dust. Avoid installing the iScan VP50
producing appliances.
•
install the iscan Vp50
other rf -emitting devices that might cause interference.
•
place the iscan Vp50
This might prevent proper cooling.
•
Attempt to service this unit. Instead, disconnect it and contact your Authorized DVDO
reseller or contact anchor bay Technologies directly.
•
open or remove unit panels or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards.
it may also cause damage to your iscan Vp50
•
obstruct the front panel ir receiver window shown in "remote Control overview".
•
do not attempt to use the remote control out of line of sight with the ir receiver.
doing so will cause improper operation.
installation to ensure optimal performance. pay particular atten-
pro
on a solid, flat, level surface such as a table or shelf.
pro
in a standard 9" equipment rack using an optional
pro
before cleaning. use a damp cloth for cleaning.
pro
on an unstable surface or one that is unable to support all
pro
directly above heat-producing equipment such as power
pro
to a high temperatures, humidity, steam, smoke, dampness,
pro
near unshielded TV or fM antennas, cable TV decoders, and
pro
on a thick rug or carpet or cover the iscan Vp50
pro
near radiators and other heat
pro
.
pro
with cloth.
pro
6
Hide quick links:
Advertisement
Table of Contents
