DVDO iScan Duo Owner's Manual page 34

On
Off (default) The Color Management System is enabled.
2. Per input per format saved settings
Input settings are now saved per format supported by the input. Different inputs support different
formats. For example, Video (composite), S-Video inputs support NTSC (480i 60Hz), PAL
(576i 50Hz), 240p 60Hz and 288p 50Hz, while Component video and HDMI inputs can support
other formats including HD and PC formats.
The iScan Duo will save input settings for each format (if supported by the input) below.
• 480i/240p (treated as one format)
• 576i/288p (treated as one format)
• 480p
• 576p
• 720p50
• 720p60
• 1080i50
• 1080i60
• 1080p24
• 1080p25
• 1080p30
• 1080p50
• 1080p60
• VGA
• SVGA
• XGA
• SXGA
The input settings that are saved include
• Picture Controls
• Deinterlacer Modes
• Game Mode
• Picture Aspect Ratio
• Active Aspect Ratio
• Panorama
• H/V-Zoom
• H/V-Pan
• Input Chromaticity
• Input color space
• Input colorimetry
• Audio delay
3. New Picture Controls
Several new picture control adjustments have been added:
3.1 Y/C Delay
The Y/C Delay control shifts the phase of the luminance (Y) with respect to chrominance (C)
in the video signal to correct for delay between Y and C, which causes color smearing in the
image. The default setting is 0.
This control is available in the Picture Controls menu.
Main Menu
29
Signals coming into the iScan Duo bypasses the Color Management System.
_
Picture Controls
_
YC Delay