Steinberg UR28M Operation Manual page 6

Panel Controls and Terminals (Details)
LINE OUTPUT A–C (phone type,
balanced/unbalanced)
For connection to monitor speakers. When the
monitor speakers have a balanced input, connect
them with a balanced cable.
There are two functions (modes) on LINE
OUTPUTS A–C: Alternate and Independent. In
the Alternate mode, one of the LINE OUTPUTS A–
C selected by the OUTPUT buttons A–C outputs a
single MIX signal selected by the SOURCE
SELECT button. In the Independent mode, LINE
OUTPUTS A–C output each MIX selected by the
SOURCE SELECT button simultaneously.
For details on the mode, including how to select
the mode, refer to the "Setup Window" (page 16)
in the section "dspMixFx UR28M" or the "Master
Levels Window" (page 21) in the section
"Dedicated Windows for Cubase Series."
LINE INPUT 3/4 (phone type, balanced/
unbalanced)
For connection to a digital instrument.
You can select the input signal level of LINE
INPUT 3/4 between "+4dBu" and "-10dBV."
Select "+4dBu" when connecting a professional
audio device, and select "-10dBV" when
connecting a consumer device. The default initial
setting is "+4dBu." To select the input signal level,
use the "Setup Window" (page 16) in the section
"dspMixFx UR28M" or the "Settings Window"
(page 21) in the "Dedicated Windows for Cubase
Series."
MIC/LINE/HI-Z 1/2 (XLR/phone type,
balanced/unbalanced)
For connection to a microphone, digital
instrument, electric guitar, or electric bass.
Operation Manual 6
UR28M