Dspmixfx Ur28M - Steinberg UR28M Operation Manual

ASIO Window (Windows only)
This is the window for selecting the ASIO driver
settings.
Device
Selects the device that will be using the ASIO
driver. This function is available when connecting
to the computer two or more devices compatible
with the Yamaha Steinberg USB Driver.
Buffer Size
Selects the buffer size (page 33) for the ASIO
driver. The range varies depending on the sample
rate.
Sample Rate Range
48 kHz or lower 64 samples – 2048 samples
88.2 kHz or higher 128 samples – 4096 samples
NOTE
For Mac, select the buffer size in the buffer size
selecting window, which is opened from an
application such as DAW software.
Input Latency/Output Latency
Indicates the delay time for the audio input and
output in millisecond units.
Audio latency varies depending on the value of
the ASIO buffer size. The lower the value of the
ASIO buffer size, the lower the value of Audio
latency.
Panel Controls for the Software Programs
About Window
This window indicates information about the audio
driver.
About
Indicates the version and copyright of the audio
driver. The letters "x.x.x" indicate the version
number.

dspMixFx UR28M

This is the window for configuring the DSP mixer
and DSP effect equipped with the device. The
signals flow top-to-down and left-to-right. The
dspMixFx UR28M provides stand-alone operation.
NOTE
You cannot operate the dspMixFx UR28M while a
Cubase series DAW is running. When Cubase is
running, configure the DSP mixer and DSP effect from
"Dedicated Windows for Cubase Series" (page 17).
Screenshot
Operation Manual
UR28M
11