Using The Device With An Ipad - Steinberg UR28M Operation Manual

Using the Device with an iPad

Introduction
This section covers basic instructions for operating
with Cubasis (an iPad app sold by Apple).
For the latest Cubasis information, see the Steinberg
web site below.
http://www.steinberg.net/
NOTE
iOS applications may not be supported in your area.
Please check with your Yamaha dealer.
Connection Example
iPad
Apple iPad Camera
Connection Kit/
Lightning - USB
Camera Adapter
Headphones
CAUTION
Make sure to set all volume levels to minimum before
connecting or disconnecting the external device.
Otherwise, high-volume output may damage your
hearing or the equipment.
Recording/Playback
1.
Turn on the device while holding down
OUTPUT button C, and keep pressing the
OUTPUT C button until an INPUT meter/
OUTPUT meter flashes.
The UR28M enters Class Compliant mode for
Apple iPad connectivity. While in the Class
Compliant mode, the power button flashes
several times by pressing the power button. To
turn off the Class Compliant mode, turn on the
power while holding down OUTPUT button C
again.
2.
Open Cubasis.
3.
Double-tap the Project [Template].
4.
5.
Monitor speaker
Microphone
6.
Enter a project name and tap [OK] in the
[New project] window.
Tap [+AUDIO] to add an AUDIO track.
Tap on the far left of your screen to show
the track menu, with [Audio input] at the top.
UR28M
Usage Examples
Operation Manual 31