Steinberg UR28M Operation Manual page 14

Effect Insertion Location
Selects the insertion location of an effect.
Option Description
MON.FX Applies an effect to only the monitor
signal (sent to the device).
INS.FX Applies an effect to both the monitor
signal (sent to the device) and the
recording signal (sent to the DAW
software).
Effect On/Off
Turns the effect on (lit) and off (dark).
Effect Edit
Opens (lit) and closes (dark) the selected effect
setup window.
Effect Type
Selects the effect.The maximum number of
Channel Strip and Guitar Amp Classics iterations
which can be used simultaneously has
restrictions. Refer to the "Limitations on the use of
effects" (page 36).
REV-X Send
Adjusts the signal level which is sent to the
REV-X.
Range: -∞ dB – +6.00 dB
Pan
Adjusts the pan.
Range: L16 – C – R16
Mute
Turns the mute on (lit) and off (dark).
Solo
Turns the solo on (lit) and off (dark).
+48V
Indicates the on/off status of the phantom power
function of the device.
Fader
Adjusts the signal level.
Range: -∞ dB – +6.00 dB
Panel Controls for the Software Programs
DAW Area
This is the area for configuring the DAW channel
settings.
Level Meter
Indicates the signal level.
Pan
Adjusts the pan.
Range: L16 – C – R16
Mute
Turns the mute on (lit) and off (dark).
Solo
Turns the solo on (lit) and off (dark).
Fader
Adjusts the signal level.
Range: -∞ dB – +6.00 dB
Operation Manual
UR28M
14