Rear Panel - Yamaha O2R Owner's Manual

Phantom Power Warning
To prevent hazard or damage,
connect only microphones and
cables that conform to the
IEC268-15A standard.
38. CURSOR buttons
These buttons select the parameters and options on the display
screen.
39.
ENTER button
This button either confirms a parameter setting made with the
Encoder wheel or it sets a parameter that only has two possible
values.

Rear Panel

1.
STUDIO MONITOR OUT connectors
These are balanced l/4" phone jacks with a +4 dB nominal output
level. They output the monitor signals for the studio, and can be
connected to the inputs on a monitor or headphone amplifier.
The monitor signal source is determined by the STUDIO buttons.
The output level is set using the STUDIO LEVEL control.
2. AUX SEND connectors
These are unbalanced l/4" phone jacks with a +4 dB nominal
output level. They output the signals from AUX busses 1 to 6, and
can be used to feed external effects processors, foldback amplifiers,
or multitrack recording equipment.
C-R MONITOR OUT connectors
3.
These are balanced l/4" phone connectors with a +4 dB nominal
output level. They are wired TRS. They output the signal selected
by the CONTROL ROOM buttons.
Controls and Connections
Digital Recording Console 02R User's Guide
11