Mixing and Automation
84
Digital Recording Console 02R
Deleting Events
You can delete specific events that have been recorded into the current
automix. You can select a timecode range, the channels desired, and the
specific events you want to delete.
1. Press the (AUTOMIX) button again.
You can stop when the "Event Extract" screen appears:
2. Use the CURSOR buttons to select the channel or channels to
delete.
You can also use the [SEL] buttons to select channels. The following
channels may be selected:
Tape 1 through 16 - the tape return channels.
•
E1 and E2 - the effect return channels.
•
STEREO - the stereo bus.
•
Mic 1 through 16 - the MIC/LINE input channels.
•
17/18 through 23/24 - the stereo pair line input channels.
•
3. You must press the (ENTER) button to switch a channel on or off.
If you double-click the [ENTER] button on a selected channel, that channel
will be turned on and all the other channels turned off, or all the channels
will be turned on. The 02R displays a confirmation popup which allows
you to select one channel or all channels:
Use the CURSOR buttons to select "ONE" to turn one channel on and all
the other channels turned off, or select "ALL" to turn all the channels on.
Press the [ENTER] button to execute your choice.
Getting Started Guide