Effects - Yamaha O2R Owner's Manual

94 Internal Effects
1. Press the (AUX 7) button
again.
The EFFECT display
function appears.
2. Select a control icon
using the cursor buttons.
3. To change the value of
the selected item,
rotate the encoder
wheel until the desired
value is shown.
Digital Recording Console 02R User's Guide

Effects

The Digital Recording Console 02R is equipped with two internal
multi-effects stereo processors. These processors have a startling range of
special effects available to apply to your mix – shimmering reverbs, clean,
precise delays, flanging and chorus, and a myriad of other effects are
available.
Display Screen
Shown below is the Effect Edit display screen:
The top of the display shows the Effects library icon, an effects curve or
icon (which changes depending on the selected effect), and a level meter for
the effects return stereo pair.
The bottom of the display shows the controls for adjusting the parameters
for the currently selected channel. These control parameters change
depending on the selected effects. Use the cursor buttons to select the
desired icon and adjust its value with the encoder wheel.
Note: Only one effects program can run on an effects processor. This means that
all the channel auxiliary sends that are set to, for example, AUX 7 will be processed
by the program that is currently running on Effect Processor 1. The current effect
program is stored in scene memory.