Digital I/O Card - Aes/Ebu (Cd8-Ae) - Yamaha O2R Owner's Manual

Digital I/O Card - AES/EBU (CD8-AE)

The AES/EBU digital I/O card (CD8-AE) is used to connect AES/EBU
compatible multitrack digital recorders or other similar digital devices to
the 02R.
Installing the CD8-AE
The AES/EBU digital I/O card (CD8-AE) is a double slot card. For
installation instructions, see "Double Slot Cards" on page 176 of the User's
Guide.
1. Connect the AES/EBU compatible multitrack digital recorder to
the 02R using the appropriate connectors.
You should use the highest quality
can afford to maintain the best possible signal quality
2. If your AES/EBU compatible multitrack digital recorder has a
dedicated wordclock output connector, plug it into the WORD
CLOCK - IN connector on the back of the 02R and turn the
terminator switch on.
If there is no dedicated wordclock output, you can obtain the
wordclock signal required from one of the digital interconnect lines.
Note: A dedicated wordclock line will give you the best wordclock
synchronization results.
Installing Options 179
digital connecting cables you
Digital Recording Console 02R User's Guide