Analog I/O Card - Ad/Da (Cd8-Ad); Analog I/O Card -Ad/Da (Cd8-Ad) - Yamaha O2R Owner's Manual

178 Installing Options
Digital Recording Console 02R User's Guide

Analog I/O Card - AD/DA (CD8-AD)

The analog I/O card (CD8–AD) is used to connect an analog multitrack
recorder or other analog devices to the 02R.
Installing the CD8-AD
The analog I/O card (CDS-AD) is a double slot card. For installation
instructions, see "Double Slot Cards" on page 176 of the User's Guide.
Before you install the CD8-AD, you need to set the individual input and
output levels for the connectors in the card. Set the switches to -10dBv
or +4dB as appropriate for the input or output levels of your analog
multitrack recorder or other analog devices.
Refer to the sheet included with the CD8-AD for more information
about the level switches.
Setup of the CD8-AD
1. Press the (DIGITAL I/O) button until the "Word Clock Select"
screen appears.
If the card was installed properly, the system software should
correctly identify it in the appropriate slot.
2. Make the required connections between the 02R and your
analog devices.
You should use the highest quality connecting cables you can afford
to maintain the best possible signal quality.