Power Status Display - JVC GY-HC900CHE Instructions Manual

Power Status Display

Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display
Currently powered by a battery.
B 14.4V
When the battery power runs out,
B 100min
the battery mark appears hollow,
C 30%
and "RES" (yellow) is displayed.
4 RES
Memo :
You can set the display using
0
[LCD/VF] B [Display Type] B
[Battery].
(A P132 [ Battery ] )
Currently powered by DC power.
G
A warning display when the supply
H
voltage of the DC power is low.
Memo :
The battery mark that indicates the battery level
0
may not appear depending on the battery in use.
When the battery that is connected does not
0
support communication, the voltage is
displayed regardless of the setting.
Display Screen
(A P170 [Display Screen in Camera Mode] )
(A P176 [Display Screen in Media Mode] )
282min SDI IN
100min 1080 /30p
50min
COMPRESS
ITU709
1 /64
ND AE ± 0
1 / 60
F2.8 ISO
102400
.
36
Power Status Display
Description
00: 00: 00.00
5 . 6f t
12 :34 : 56
K
B 5600
Menu Screen
(A P108 [Display and Description of the Menu
Screen] )
Display Settings
.
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
The front and back tally lamps of the camera
0
recorder appear blinking.
The warning tone is output from the speaker or
0
[PHONE] terminal.
Adjust the volume level using the [ALARM]
volume adjustment knob.
Memo :
If you continue to use the camera recorder while
0
the power warning is displayed, the camera
recorder will stop automatically when the battery
or supplied voltage from the DC power becomes
lower.
Caution :
The remaining battery power and time are
0
displayed as they are from the battery
information. Accurate data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.