Power Status Display - JVC GY-HC500E Instructions Manual

Power Status Display

Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display
Currently powered by a battery.
B 7.4V
When the battery power runs out,
B 100min
the battery mark appears hollow,
C 30%
and "RES" (yellow) is displayed.
4 RES
Memo :
You can set the display using
0
[LCD/VF] B [Display Type] B
[Battery].
(A P130 [ Battery ] )
Acquisition of battery information
F
may fail if a genuine battery is not
used.
Appears when an error occurs
T
during battery charging.
Currently powered by an AC
G
adapter.
Camera recorder battery charging
P
in progress.
Q
(A P130 [Details on charging
R
condition] )
S
(A P130 [ Battery ] )
Memo :
If the supplied battery (or equivalent battery sold
0
separately) is not used, the battery mark which
indicates the battery level may not appear.
Display Screen
(A P166 [Display Screen in Camera Mode] )
(A P172 [Display Screen in Media Mode] )
282min
1 /64
ND AE ±
0
4030 20 10 0
1 / 60
F2.8
ISO
102400
.
Description
00: 00: 00.00
5 . 6f t
12 :34 : 56
K
B 5600
Menu Screen
(A P108 [Display and Description of the Menu
Screen] )
Display Settings
.
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
The tally lamp blinks.
0
The warning tone is output from the monitor
0
speaker or [x] terminal.
Memo :
You can specify whether to turn on the warning
0
tone as well as setting the volume in [A/V Set] B
[Audio Set] B [Alarm Level].
(A P137 [ Alarm Level ] )
In the event that the battery level runs low while
0
it is being used, the camera recorder will stop
operating automatically.
Caution :
The remaining battery power and time are
0
displayed as they are from the battery
information. Accurate data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.
Power Status Display
37