CYBEX Free Weight Owner's Service Manual page 69

8. Attach bottom support bar (see steps 8A and 8B and Figure 12).
A. Position bottom support bar (#13) between right and left side attachments (#19 and #20).
B. Secure bottom support bar (#13) to right and left side attachments (#19 and #20) using two
lockwashers .50 (#18), two hex nuts .50-13 (#15), two SHCS .50-13 x 1.00 (#16) and two plastic
inserts 1.19 Dia. (#6). See Figure 12.
16
6
19
Figure 12
9. General anchoring guidelines (see steps 9A and 9B).
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
A. Use fasteners having a minimum of 500 lbs tensile capacity (3/8" grade 2 bolt or better).
B. If all legs/frames do not contact surface, DO NOT pull down with anchors. Shim any leg or
frame (with fl at washers) not in contact with surface.
Cybex Free Weight Owner's Manual
18 15
20
16
6
13
15
18
Assembly
Page 5-13