Table of Contents
Advertisement
MAN-MAXPRO
REV. B.0.
•
•
•
•
•
•
7.7.3
Each calibration record contains the following (See Figure 9):
•
•
•
•
Note: For calibration readings, "Fail" indicates a calibration
7. DATA LOGGING
To view the graphs of another group, click on the tab of the
corresponding group number.
To view an enlarged single graph, simply double-click on
the desired graph.
–
To print an enlarged single graph, click on the Print
Graph button.
–
To return to the Graph Screen, click on the Close button.
To focus on a particular time span of the graphs, enter the
desired start time and end time and click on the Refresh
Graphs button on the Graph Screen.
To display the immediate high alarm level and the
immediate low alarm level on the graphs, check the Imm/Hi
Alarm and Imm/Lo Alarm boxes, respectively.
To print the graphs, click on the Graphs menu and then on
Print (or simply click on the Print button on the toolbar of the
Graph Screen).
To return to the Main Screen, click on the Graphs menu and
then click on Close (or simply click on the Close button on
the toolbar of the Graph Screen).
Current Calibration Records
Date and time that calibration took place
Pre-calibration readings (for up to 4 gases)
Post-calibration readings (for up to 4 gases)
An asterisk symbol (*) to indicate a note is attached
failure, and "N/A" indicates that a gas sensor is missing.
49
Advertisement
Table of Contents
