Table of Contents
Advertisement
MAN-MAXPRO
REV. B.0.
•
•
•
•
7. DATA LOGGING
Click on Yes. The instrument will start to count up. This
count also takes place on the computer screen.
After all data has been transferred, the instrument displays
"DATA SENT". Depending on the firmware version, the
instrument either shuts itself off, or continues to run in the
normal operating mode. When the computer screen displays
"Transfer complete", click OK.
For downloading instrument parameters, click the Upload/
Modify Instrument Parameters button on the tool bar and
the parameters will be displayed in a dialog box.
downloading data, type your last name, first name, and
location, when prompted to do so. Then, click OK.
All fields, including last name, first name, and location,
must be entered in order to save the downloaded data.
The maximum length to be entered for last name, first
name, and location is 14, 14, and 20 alphanumeric
characters, respectively.
Downloading at the same date and time for a particular
instrument is not allowed. For example, if you download
data from an instrument having serial number 1234 at 3:30
p.m. on December 8, 2002, and you try to download again
with the same instrument at the same date and time as
above, it will not save any data for this new download.
Wait a moment for the computer to store the information.
Now, data from the most recent download is displayed on
the Main Screen and the file relating to this download can
be accessed from the Open dialog box.
WARNING
44
For
Advertisement
Table of Contents
