Preparation For Use; Unpacking; Charging - Honeywell MicroMAX Pro User & Maintenance Manual

Multi-gas monitors
Table of Contents

Advertisement

MAN-MAXPRO
REV. B.0.

1. PREPARATION FOR USE

1.1
Check for these items:
1.2
1. PREPARATION FOR USE

UNPACKING

Packaging (retain for possible future use)
Instrument with internal rechargeable battery pack
Calibration certificate
Standard accessories:
AC battery charger
Alkaline battery holder
Dust filter
10-foot sampling hose with filter and water trap
Rubber boot with belt clip and neck strap
Instruction manual

CHARGING

Do not change or charge batteries in a hazardous location.
Do not try to turn on or otherwise operate this instrument
until it is fully charged.
Use only the MPRO-1 A.C.charger, the MPRO-2 220 volt
AC charger, or the MPRO-6 vehicular charger. Use of any
other charger may cause permanent instrument damage
and will void any warranties. The charge period is
dependent on the condition of the batteries, but should not
exceed about 4 hours for a completely depleted battery
pack. Partially depleted packs will be charged in a much
shorter period of time.
CAUTION
10

Advertisement

Table of Contents
loading

Table of Contents