System Configuration; Configuring The System For The Nec Snmp Agent; Configuring The System For Nec Webtelligent; Configuring The System For Microsoft Internet Explorer - NEC POWERMATE 2000 Service And Reference Manual

System Configuration

See the following sections for system configuration information.

Configuring the System for the NEC SNMP Agent

TCP/IP must be enabled before you can use the NEC SNMP Agent. See
"Changing Network Settings" in this document to enable TCP/IP. See
"Installing Applications in the Correct Order" in this document and "NEC
SNMP Agent" in Chapter 4 of the PowerMate 2000 Series User's Guide for
installation information.

Configuring the System for NEC WebTelligent

TCP/IP must be enabled before you can use NEC WebTelligent. See "Changing
Network Settings" in this document to enable TCP/IP. See "NEC WebTelligent"
in Chapter 4 of the PowerMate 2000 Series User's Guide for detailed
installation information.

Configuring the System for Microsoft Internet Explorer

TCP/IP must be enabled before you can use Microsoft Internet Explorer. See the
next section, "Changing Network Settings," to enable TCP/IP. Install Internet
Explorer from the NEC Application and Driver CD.
Note
systems with the Windows 98 or Windows 2000 operating
system.

Changing Network Settings

All systems are configured with the NetBEUI and NWLink protocols enabled.
However, before you connect a system to your network you might need to:
!
enable a different network protocol
!
disable unneeded protocols for enhanced system performance
!
add or change network, domain, and gateway information.
The following procedure describes how to disable the NetBEUI and NWLink
protocols, enable TCP/IP, and provide network, domain, and gateway
information. (If a different protocol is enabled, the menu choices might differ
from those described in the procedure.)
1. From the Windows desktop, click
and click
2. Double click the
: Internet Explorer 5.0 comes preinstalled on
Control Panel .
icon in the Control Panel window.
Network
Start on the taskbar, point to
PM 2000 Series Release Notes A-7
Settings ,