Launching The Application And Driver Cd; Installing Software - NEC POWERMATE 2000 Service And Reference Manual

Launching the Application and Driver CD

Use the Application and Driver CD to install applications, drivers, utilities,
Internet browsers, and the online NEC INFO Center.
Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
Launch the Application and Driver CD as follows.
!
In systems running the Windows NT operating system, insert the NEC
Application and Driver CD after the system reboots and you have chosen
the Windows NT Workstation Version 4.00 operating system. Be sure to
insert the CD before Windows NT actually completes its boot and
displays the NT logon screen.
Note
Application and Driver CD after the first logon to Windows
NT.
!
For systems running the Windows 98 or Windows 2000 operating
system, insert the NEC Application and Driver CD after the system
reboots.
The CD autorun feature loads the NEC Application and Driver Installation
program.
The Application and Driver Installation Utility dialog box appears. See
"Installing Software" for further instructions.

Installing Software

The Application and Driver Installation Utility dialog box consists of the
following components:
!
Selection Tabs — Located just below the title bar, each tab represents a
software category. The selection tabs include applications, drivers,
utilities, Internet browsers, and the online NEC INFO Center.
!
Description — Located in the bottom portion of the dialog box, the text
describes the selected or highlighted software category or application,
driver, etc.
!
Install — Clicking the Install button installs the selected software.
!
Exit — Clicking the Exit button closes the Application and Driver
Installation Utility dialog box.
:
Install the optional software located on the NEC
System Configuration 2-23