NEC POWERMATE 2000 Service And Reference Manual page 38

Menu Item
Transfer Mode
Ultra DMA Mode
Keyboard Features
Numlock
Key Click
Keyboard auto-repeat
rate
Keyboard auto-repeat
delay
Legacy USB Support
Boot-Time Diagnostics
Screen
System Memory
Extended Memory
Main Menu Items
Settings (default is bold)
Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, Fast
PIO3/DMA1, Fast PIO4/DMA2
Selects the method for moving data to and from the drive.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4
Selects the Ultra DMA Mode for moving data to and from the
drive. Autotype the drive to select the optimum transfer mode.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Press Enter to check or change keyboard parameters.
Auto, On, Off
Selects the power-on state for Num Lock.
Disabled, Enabled
Enables or disables key click.
30/sec, 26.7/sec, 21.8/sec, 18.5/sec, 13.3/sec, 10/sec, 6/sec,
2/sec
Selects key repeat rate.
1/4 sec, 1/2 sec, 3/4 sec, 1 sec
Selects delay before key repeat.
Disabled, Enabled
Disables or enables legacy USB support.
Disabled, Enabled
Selecting Enabled displays the diagnostic screen during boot.
Displays amount of conventional memory detected during
boot.
This field is read-only and cannot be changed from BIOS
Setup.
Example: 640 KB
Displays amount of extended memory detected during boot.
This field is read-only and cannot be changed from BIOS
Setup.
Example: 63488 KB
System Configuration 2-11