Rear Fan - HP t820 Maintenance & Service Manual

Rear fan

Description
Rear fan
The rear fan is secured to the rear right corner of the chassis. You must remove the system board before
you can remove the rear fan.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front fan
4. Remove the drive cage
5. Remove the fiber NIC assembly
6. Remove the heat sink
7. Remove the system board
8.
From the outside of the chassis, remove the four Phillips screws that secure the fan to the chassis.
(Preparation for disassembly on page
(Access panel on page
(Front fan on page 25).
(Drive cage (fiber NIC assembly holder) on page
(Installing the fiber NIC assembly on page
(Heat sink on page 27).
(System board on page
18).
44).
Spare part number
691352-001
17).
34).
37).
Rear fan
47