Using Computer Setup (F10) Utilities - HP t820 Maintenance & Service Manual

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. Press either
bottom of the screen.
Pressing
NOTE:
again press
NOTE:
Selection option in the ESC (Startup) Menu or using the
3. If you pressed Esc, press
4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power, and Advanced.
5.
Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, then press Enter. To return to the Computer Setup Utilities
menu, press Esc.
6. To apply and save changes, select File > Save Changes and Exit.
If you have made changes that you do not want applied, select Ignore Changes and
●
Exit.
To reset to factory settings or previously saved default settings (some models), select Apply
●
Defaults and Exit. This option will restore the original factory system defaults.
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after
exiting the F10 Setup screen.
Table B-1 Computer Setup (F10) Utility
Heading
File
Storage
Security
Power
Advanced
Esc or F10 while the "Press the ESC key for Startup Menu" message is displayed at the
Esc displays a menu that allows you to access different options available at startup.
If you do not press Esc
Esc or F10 when the monitor light turns green to access the utility.
You can select the language for most menus, settings, and messages using the Language
F10 to enter Computer Setup.
Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup
or F10 at the appropriate time, you must restart the computer and
Table
Computer Setup—File on page 60
Computer Setup—Storage on page 61
Computer Setup—Security on page 62
Computer Setup—Power on page 65
Computer Setup—Advanced on page 66
F8 key in Computer Setup.
Computer Setup (F10) Utilities
59