Computer Setup-File - HP t820 Maintenance & Service Manual

Computer Setup—File
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table B-2
Option
System Information
About
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Apply Defaults and
Exit
Ignore Changes
and Exit
Save Changes and
Exit
60 Appendix B Computer Setup (F10) Utility, BIOS Settings
Computer Setup—File
Description
Lists:
Product name
●
SKU number (some models)
●
Processor type/speed/stepping
●
Cache size (L1/L2)
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
●
Integrated MAC address for embedded, enabled NIC (if applicable)
●
System BIOS (includes family name and version)
●
Chassis serial number
●
Asset tracking number
●
Displays copyright notice.
Allows you to set system time and date.
Allows you to update the system ROM with a BIOS image file located on removable media.
Save to Removable Media
Saves system configuration to a formatted USB flash media device.
Restore from Removable Media
Restores system configuration from a USB flash media device.
Save Current Settings as Default
Saves the current system configuration settings as the default to be used whenever "Apply Defaults
and Exit" is selected.
Restore Factory Settings as Default
Loads the original factory system configuration settings for use by a subsequent "Apply Defaults and
Exit" action.
Applies the currently selected default settings.
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration or default settings and exits Computer Setup.