Msata Drive - HP t820 Maintenance & Service Manual

mSATA drive

Description
32-GB mSATA drive
16-GB mSATA drive
The mSATA drive is installed onto the system board underneath the hard drive cage.
Remove the mSATA drive:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the drive cage
4. Remove the two Phillips screws (1) that secure the drive to the computer.
5. Slide the drive away to remove it from the socket (2).
Reverse this procedure to install the mSATA drive.
(Preparation for disassembly on page
(Access panel on page
(Drive cage (fiber NIC assembly holder) on page
18).
Spare part number
719566-001
719565-001
17).
34).
mSATA drive
35