Implementing gemalto smart card for use with hp compaq t5720 and hp cci (45 pages)
Summary of Contents for HP t150
Page 1
Hardware Reference Guide HP MultiSeat Thin Client t150...
Page 2
No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Hardware Reference Guide HP MultiSeat Thin Client t150 First Edition (November 2010) Document Part Number: 641566–001...
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
HP MultiSeat Thin Client t150 Security Clip ................. 6 Securing the HP MultiSeat Thin Client t150 ..............6 Securing the HP MultiSeat Thin Client t150 in the Mounting Bracket ........ 7 Cable Lock ..........................8 Appendix C Mounting the HP MultiSeat Thin Client t150 ............9 Mounting Bracket ........................
Page 6
Appendix F Shipping Information ..................18 Shipping Preparation ......................18 Important Service Repair Information ..................18 Index ..........................19...
Front Panel Components For more information, http://www.hp.com and search for your specific HP MultiSeat Thin Client t150 model to find the model-specific QuickSpecs. Figure 1-1 Front panel components Power LED PS/2 connectors (2) Line-out (headphone) audio connector USB 2.0 connectors (2)
Rear Panel Components For more information, http://www.hp.com and search for your specific HP MultiSeat Thin Client t150 model to find the model-specific QuickSpecs. Figure 2-1 Rear panel components Cable lock slot USB PC power connector to host PC (USB Type A/B...
Serial Number Location Figure 3-1 Serial number location Every HP MultiSeat Thin Client t150 includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance.
** The operating temperature range when the HP 1° C/300m (1.8° F/1000ft) to a maximum of 3Km MultiSeat Thin Client t150 is attached to a flat panel (10,000ft), with no direct, sustained sunlight. Upper limit using the mounting bracket is 50° to 95° F (10° to 35°...
Page 11
Table A-1 HP MultiSeat Thin Client t150 (continued) Relative Humidity (non-condensing) Operating 10–90% 10–90% (max. wet bulb temperature is 28° C or 84.2° F) 5–95% 5–95% Nonoperating (max. wet bulb temperature is 38.7° C or 101.6° F) Maximum Altitude (unpressurized)
HP MultiSeat Thin Client t150 Security Clip The HP MultiSeat Thin Client t150 ships with a security clip which can be fastened to the rear panel of the HP MultiSeat Thin Client t150. To prevent unauthorized removal of the HP MultiSeat Thin Client t150, fasten a padlock through the clip and a cable.
MultiSeat Thin Client t150 security clip between the guides on the back of the HP MultiSeat Thin Client t150 into the slot on the back of the mounting bracket (1). Use the provided screw to fasten the security clip to the HP MultiSeat Thin Client t150 (2).
Cable Lock The HP MultiSeat Thin Client t150 is designed to accept a security cable lock. This cable lock prevents unauthorized removal of the HP MultiSeat Thin Client t150. To order this option, visit the HP Web site http://www.hp.com and search for your specific HP MultiSeat Thin Client t150 model.
Inserting the HP MultiSeat Thin Client t150 into the mounting bracket Hold the HP MultiSeat Thin Client t150 so that the bottom of the unit will be next to the Mounting Bracket and slide the HP MultiSeat Thin Client t150 front-first into the bracket.
Figure C-2 Removing the security clip If there is a lock through the HP MultiSeat Thin Client t150 security clip on the back of the HP MultiSeat Thin Client t150 , unlock and remove it (1). Remove the screw holding the HP MultiSeat Thin Client t150 security clip (2) and remove the security clip from the back of the mounting bracket (3).
The following illustrations demonstrate some of the supported and not supported mounting options for the mounting bracket. You can mount the HP MultiSeat Thin Client t150 in the mounting bracket on the back of a flat ● panel monitor stand.
Page 18
Figure C-6 HP MultiSeat Thin Client t150 mounted on wall You can mount the HP MultiSeat Thin Client t150 in the mounting bracket under a desk. ● Figure C-7 HP MultiSeat Thin Client t150 mounted under desk Appendix C Mounting the HP MultiSeat Thin Client t150...
HP MultiSeat Thin Client t150 and/or other equipment. Do not mount the HP MultiSeat Thin Client t150 on a flat panel monitor stand, between the panel and the stand. Figure C-8 Unsupported mounting position—HP MultiSeat Thin Client t150 between stand and...
Keep liquids away from the HP MultiSeat Thin Client t150. ● Turn off the HP MultiSeat Thin Client t150 and wipe the exterior with a soft, damp cloth as ● needed. Using cleaning products may discolor or damage the finish.
Page 21
Figure D-1 Horizontal orientation You can lay the HP MultiSeat Thin Client t150 under a monitor stand with at least one inch of ● clearance. Figure D-2 Under monitor stand Supported Orientations...
Do not block the vents. Do not put the HP MultiSeat Thin Client t150 in a drawer or other sealed enclosure. Do not place a monitor or other object on top of the HP MultiSeat Thin Client t150. The HP MultiSeat Thin Client t150 requires proper ventilation to maintain operating temperatures.
There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: Use a wrist strap connected by a ground cord to a grounded HP MultiSeat Thin Client t150. Wrist ● straps are flexible straps of 1 megohm +/- 10 percent resistance in the ground cords. To provide proper grounding, wear the strap snug against the skin.
Shipping Information Shipping Preparation Follow these suggestions when preparing to ship the HP MultiSeat Thin Client t150: Turn off external devices connected to the HP MultiSeat Thin Client t150. Disconnect the system components and external devices from their power sources, then from the HP MultiSeat Thin Client t150.