Advertisement
Assembly
Note: Carefully cut the straps holding the carton together. Cut the carton sleeve so that it can
lay flat on the ground to provide a clean surface for assembling your Grill. Remove the packing
materials and all the parts from inside the Cabinet. After unpacking all the parts, check to make
sure you HAVE all the parts. If anything is damaged or missing, contact our toll free number:
866-475-5180. Discard all packing material in a safe and recyclable manner. Save this
Assembly Manual for future reference.
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
Step 1
Left Front Leg
Fig. 1
Step 2
Left Rear Leg
Fig. 2
Right Front Leg
Right Rear Leg
8
Step 1: Front Leg Assembly
Locate: Cabinet and Lid Assembly, Left Front
Leg and Right Front Leg and (7) M6x15 bolts.
Note: Each leg will have an identification
label. Do not fully tighten any leg bolts until
instructed to do so later in the assembly.
Procedure:
Position cabinet on its back and attach left
front leg using (3) M6x15 bolts and right front
leg using (4) M6x15 bolts as shown in Figure
1.
Step 2: Rear Leg Assembly
Locate: Left Rear Leg and Right Rear Leg
and (6) M6x15 bolts.
Procedure:
Position cabinet as shown in Figure 2 and
attach left rear leg using (2) M6x15 bolts and
right rear leg using (4) M6x15 bolts.
Hide quick links:
Advertisement
