Voice Mail; Central Phonebook - ASCOM d41 Configuration Manual

Configuration Manual
Ascom d41 DECT Handset
5.1.3 Save a handset configuration as a template
It is possible to save all settings of a handset as template. Please note that this does not
include contacts and other personal data. The template will only contain configuration
data.
This template can be used as a backup if you want to restore the configuration of the
handset at a later stage or as a template that can be applied to a number of handsets.
1 Open PDM Windows version or the Device Manager in the IMS3.
2 Open the Numbers tab and select the handset you want to save as a template.
3 Make a right-click and select "Use as a template...". Enter a descriptive name for
the template.
4 The Edit template window is opened. By default, all parameters are selected and are
saved when clicking on "OK".
If one or more parameters should be excluded, remove them by clearing the
checkbox next to the parameter.
Some parameters are user specific. If it is decided to apply this type of template to
several handsets, it is recommended to exclude the following parameters:
• Owner ID - A text string displayed in idle mode. The parameter is located directly
under "Settings".
• Phone lock PIN code - The security code used to unlock the keypad. The
parameter is located under under Settings > Locks.
5 Click "OK".
5.1.4 Synchronizing a handset with PDM
After installing and saving a handset, it will be synchronized each time it is connected to
the PDM. The synchronization transfers parameter changes between the handset and the
PDM and vice versa as follows:
• If a parameter has been changed in the handset, it will be transferred to the PDM/
IMS3.
• If a parameter has been changed in the PDM/IMS3 while the telephone was
disconnected, it will be transferred to the handset.
If the same parameter has been changed in both the PDM/IMS3 and the handset, the
value in PDM/IMS3 will be transferred to the handset.
5.2

Voice Mail

In some systems it is needed to assign the handset number of the Voice Mail service. The
parameter can be set specifically for each PBX subscription on the handset and is accessed
from Systems > System x > PBX Settings > Numbers. "System x" is replaced with the
subscription (System A - System H) that is configured.
5.3

Central Phonebook

If the system is equipped with a messaging server with a phonebook service, the Central
Phonebook on that server can be accessed from the handset. The number to be used is set
to default 999999. It can be changed by editing parameters in a Number or a template.
If the system is not equipped with a Central Phonebook, this menu option can be removed
from the handset by entering an empty value for the corresponding parameter.
21 June 2012 / Ver. G
TD 92641EN
17