Display Management Layout; Owner Identification In The Idle Display - ASCOM d41 Configuration Manual

Configuration Manual
Ascom d41 DECT Handset

5.20 Display Management Layout

In the Active area of the display, the first 2 rows can show 12 characters each (default). It
is possible to extend the number of rows/characters to be displayed in idle mode/during a
call up to 3 rows with 16 characters each. When extending the rows/characters, the
System name or Owner ID will be hidden in order to allocate space for system dependent
information.
Note: All settings except the default setting require an IP-DECT system with software
version 5.0.x or higher.
1 Select System X.
2 In the Display Management Layout drop-down list, select one of the following:
• 2x12 characters
• 2x16 characters
• 3x16 characters, remove Owner ID
• 3x16 characters, remove system name

5.21 Owner identification in the idle display.

It is possible to add owner identification in standby mode of the handset. In a template or
Number in PDM/IMS3, the parameter is found at:
Settings > Owner ID
Note: It is also possible to configure the Owner ID via the handset menu. See User
Manual, Ascom d41 DECT Handset, TD 92582EN.
21 June 2012 / Ver. G
TD 92641EN
26