Hardware Overview; Version Overview - Honeywell Excel 50 Installation Instructions Manual

EXCEL 50 INSTALLATION INSTRUCTIONS

Hardware Overview

Fig. 1. Excel 50 Controller housing
Fig. 2. Screw terminal blocks

Version Overview

Housing:
With Man-Machine-Interface (MMI)
Without MMI
Application Module:
Standalone (EPROM)
Standalone (Flash-EPROM)*
C-Bus (Flash-EPROM)*
C-Bus/serial port for Meter-Bus (Flash-EPROM)*
L W network (Flash-EPROM)*
ON ORKS
C-Bus/L W network (Flash-EPROM)*
ON ORKS
EN1B-0101GE51 R1105D
Fig. 3. Fuse, 4 A quick-acting (behind Terminal
Fig. 4. Application module
Fig. 5. Meter-Bus adapter
Fig. 6. Mounting accessories
*Version can be upgraded by firmware. Firmware with
integrated modem communication is available for down-
loading to the controller.
Mounting:
Front door
Cabinet, front side facing DIN rail
Cabinet, back side facing DIN rail
Terminals:
Screw Terminal blocks
6
Block A)
M+ M- M+ M- M+ M-
M-Bus
On Short Slave
PW3
Power RS232C
V+ V- RX TX