How To Select A Utility Menu - Fostex DV40 Operation Manual

How to select a Utility menu

To select a Utility menu, follow the procedure below.
1. While the unit is stopped, press the [SHIFT] key to enter the shift mode (the SHIFT indicator lights up).
2. Press the [SETUP] key.
The unit enters the Utility mode, while the SHIFT indicator turns off.
The first time the unit enters the Utility mode after turning on the power, the first level of the "Rec Protect?"
menu appears. Or if it is not the first time the unit enters the Utility mode after turning on the power, the
first level of the previously selected menu appears.
3. Rotate the jog dial (or use the [SKIP/CURSOR] |<</>>| keys to select a desired menu.
Rotating the jog dial left (or right) or pressing the [SKIP/CURSOR] |<< (or >>|) key cycles through the Utility
menus in the following order (or reverse order).
Flashing
Flashing
Flashing
Flashing
Flashing
12-2
Flashing
Flashing
SETUP
Flashing
Flashing
Flashing