7> Addition Of "Set Next Event?" Setup Menu - Fostex DV40 Operation Manual

DV40 Owner's Manual (Version V1.2 Supplement>
<7> Addition of "Set Next Event?" SETUP Menu
An Event No can be set in a newly added "Set Next Event?" SETUP menu.
The Event No set hereby will count up every time RECORD is executed and is recorded as an
EVENT information of BWF BEXT Chunk Descriptor in each file.
<NOTE>
Change of Event No does not affect the current audio file but does affect a newly recorded file.
Note that the Event No is recorded on the "BWF" file only, not on the "SDII" file.
• Setting Event No
1. While the unit is in STOP mode, press the [SETUP] key.
2. Select the "Set New Event?" menu by the JOG dial and press the [ENTER/YES] key.
The last digit of currently set Next Event No starts flashing. (In the default setting "00001", "1"
flashes.)
3. Input a desired number by the JOG dial (or 10 key) and press the [ENTER/YES] key.
<NOTE>
If " 00000 " is input as the Next Event No, it will be automatically rectified to the default setting
" 00001 ".
4. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP mode.
SETUP
SETUP
22
Flashing
Flashing