Loading A Dvd-Ram Disk - Fostex DV40 Operation Manual

Loading a DVD-RAM disk

1. Press the [OPEN/CLOSE] key.
The display shows "Tray Open!" and the tray opens.
2. Place a DVD-RAM disk in the tray, and press the [OPEN/CLOSE] key again (or push
the front of the tray lightly).
The disk is loaded. After the unit scans the disk ("Disk Scan!" is shown as a flashing display while
scanning), it automatically recognizes that the disk is unformatted and enters the "Format" menu
("Format" with flashing "?" is shown).
You can format the disk by the following procedure in the next page.
About usable DVD-RAM disks
TYPE 2, one-side disks with 4.7 GB capacity can be used
with the DV40.
REWRITABLE
ABS
1
2
∞
60 50 42 34
3
4
H M S F
PGM
28 2018 12 8 6 5 4 3 2 1 0 OL
Flashing
1-4
BIT 24
FS 48
kHz
CLOCK
-INT-
FORMAT
BWF