3> Audio Cd (Cd-Da) Playback Function; Loading Audio Cd; Selecting Track - Fostex DV40 Operation Manual

<3> Audio CD (CD-DA) Playback Function
An audio CD (CD-DA) which complies to RED BOOK can be played back on DV40. Outputting
LTC or chasing to an external equipment while reproducing an audio CD is now possible.
<NOTE>
There is a case that an audio CD with various copy protection cannot be played back.

• Loading Audio CD

When an audio CD is loaded onto DV40, DV40 starts scanning the disk ("Scan Disk!" flashes.) and the
display changes to the condition below.
"00H00M10S00F"
Indicates that this is
t h e S TA R T LT C
address of track 01.
The displayed LTC
a ddres s ha s + 1 0
seconds of preroll
t i m e i n o r d e r t o
c o m p e n s a t e t h e
synchronization to an
external equipment
via RS-422 or LTC.
The corresponding
ABS time is naturally
00H00M00S00F.

• Selecting Track

Selecting the track on an audio CD can be done by [SKIP/CURSOR |<< >>|] key manipulation or utilizing
the FILE SELECT function.
Select by [SKIP/CURSOR |<< >>|] key:
1. While the unit is in either PLAY or STOP mode, press the [SKIP/CURSOR >>|] or [SKIP/CURSOR |<<]
key.
Pressing the key the number of times will locate to the corresponding track. (If the key is pressed in
PLAY ,mode, the unit is put into STOP mode after locating.)
Select by FILE SELECT function"
1. While the unit is in either PLAY or STOP mode, press the [FILE SEL] key.
As indicated below, the current track number starts flashing.
2. Input a desired track number by rotating the JOG dial or 10 key and press the [ENTER/YES] key.
<NOTE>
If a nonexisting track number is input and the [ENTER/YES] key is pressed, " Wrong Track! " will be
displayed and the unit locates to the beginning of last track.
DV40 Owner's Manual <Version V1.2 Supplement>
"Track: 01/12"
Indicates that there are 12 audio
tracks in the disk and the current
track is 01.
LTC
H M
1
2
∞
60 50 42 34 28 2018 12
Indicates that a loaded disk is an
audio CD.
15
"[End]"
Indicates the currently set STOP
mode. For STOP mode, refer to
the next page.
S F
PGM
BIT
16
FS
kHz 44.1
CLOCK
-0.1%
8 6 5 4 3 2 1 0 OL
-INT-
FORMAT
CD
"CD"
Flashing
"BIT16"
"FS kHz 44.1"
Indicates the FS and
resolution of audio CD.
If the settings differs
from the front panel
SW physical settings,
T h e S W p hy s i c a l
settings flash.