Tc Setup Mode Details; To Enter The Tc Setup Mode - Fostex DV40 Operation Manual

TC Setup mode details

The TC Setup mode allows you to set the following which are necessary for recording/play-
back of timecode or synchronizing the unit to external timecode.
1. Editing timecode generated by the internal TC generator
2. Editing the chase offset to external timecode
3. Trimming the chase offset
4. Chase mode selection
5. Capturing the LTC time for storing it as the chase offset (Catch offset)
6. Editing the LTC start time
7. Force jamming to external timecode
8. Selecting output timecode

• To enter the TC Setup mode

1. Press the [SHIFT] key to turn on the indicator, then press the [CHASE/TC SETUP] key.
The unit enters the TC Setup mode and the display shows a menu. The first time the unit enters the
TC Setup mode after turning on the power, the "Chase Offset?" menu is shown. Otherwise, the display
shows the menu previously selected.
2. Use the jog dial (or |<</>>| keys) to select the desired menu.
You can cycle through menus in the following order (or reverse order).
OFFSET
OFFSET
OFFSET
H M S F SF
CHASE
Flashing
Flashing
H M S F SF
CHASE
Flashing
H M S F SF
Flashing
H M S F
OFFSET CHASE
5-5
SF
Flashing
H M S
H M S
GEN
Flashing
H M S
GEN
Flashing
F SF
Flashing
F
F
Flashing