System Connections; Connection To A Personal Computer - JVC GR-DVM76 Instructions Manual

78
EN

Connection To A Personal Computer

[A] Using USB cable
Open the
connector
cover.
[B] Using DV cable
Open the connector cover.
[A] Using USB cable
This camcorder can transfer still images to a PC by
using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
2
If you are using the USB connection, set the
VIDEO/MEMORY switch to "MEMORY".
3
Turn the camcorder's Power Switch to "P"
while pressing down the Lock Button located on
the switch and turn on the PC.
Refer to the instruction manual of the software
on how to transfer a still image to the PC.
NOTES:
Refer to "SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE" for the installation of the
bundled software and drivers.
It is recommended to use the AC Adapter as the
power supply instead of the battery pack. (
To USB
To DV
Core filter
pg. 11)
To USB connector
USB cable (provided)
OR
DV cable
(optional)
Core filter
Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC, or use the DV cable
provided with the capture board.
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
The system may not work properly depending on
the PC or capture board you are using.
"USB MODE" and/or "ACCESSING FILES"
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.

SYSTEM CONNECTIONS

PC
To DV
connector
PC with DV
connector