JVC GR-DVM76 Instructions Manual page 84

84
EN
Advanced features
SYMPTOM
14. The focus does not adjust
automatically.
15. Snapshot mode cannot be
used.
16. The colour of Snapshot looks
strange.
17. The image taken using
Snapshot is too dark.
18. The image taken using
Snapshot is too bright.
19. White Balance cannot be
activated.
20. Wipe/Fader effects do not
work.
21. The Black & White Fader does
not work.
22. Program AE with special
effects does not work.
23. Even when Slow Shutter is not
selected, the image looks like
it is activated.
POSSIBLE CAUSES
14. • Focus is set to the Manual
mode.
• The recording was done in a
dark place, or the contrast
was low.
• The lens is dirty or covered
with condensation.
15. • The Squeeze mode
(SQUEEZE) is selected.
16. • The light source or the
subject does not include
white. Or there are various
different light sources behind
the subject.
• The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
17. • Shooting was performed
under backlit conditions.
18. • The subject is too bright.
19. • The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
20. • The Power Switch is set to
"A".
21. • The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
22. • The Power Switch is set to
"A".
23. • When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
TROUBLESHOOTING (cont.)
CORRECTIVE ACTION
14. • Set Focus to the Auto mode.
( pg. 55)
• Clean the lens and check the
focus again. (
15. • Disengage the Squeeze
(SQUEEZE) mode.
( pg. 46)
16. • Find a white subject and
compose your shot so that it
also appears in the frame.
( pg. 27, 53)
• Disengage the Sepia (SEPIA)
and Monotone
(MONOTONE). (
17. • Press BACKLIGHT.
( pg. 57)
18. • Set "r PROGRAM AE" to
"SPOTLIGHT". (
19. • Disengage the Sepia (SEPIA)
or Monotone (MONOTONE)
mode before setting White
Balance. (
20. • Set the Power Switch to "M".
( pg. 14)
21. • Disengage the Sepia (SEPIA)
and Monotone
(MONOTONE). (
22. • Set the Power Switch to "M".
( pg. 14)
23. • If you want the lighting to
look more natural, set "GAIN
UP" to "ACG" or "OFF".
( pg. 38, 45)
pg. 91)
pg. 42)
pg. 42)
pg. 42, 43)
pg. 42)