Playback Menus; Video Menu - JVC GR-DVM76 Instructions Manual

PLAYBACK MENUS

Video Menu

VIDEO
Playback sound
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays
the sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on page 38, select "SOUND MODE" or "12BIT MODE" from the Menu Screen and set it to the
desired parameter.
NOTES:
The "SOUND MODE" setting is available for both 12-bit and 16-bit sound. (In previous models' functions,
"12-bit" is called "32 kHz" and "16-bit" is called "48 kHz".)
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
SOUND STEREO
MODE
SOUND L
SOUND R
12BIT MODE MIX
SOUND 1
SOUND 2
Synchro adjustment
SYNCHRO ±0.0
Recording mode
REC MODE SP
LP
Blank search
BLANK SRCH CANCEL
EXECUTE
Dubbing from tape to memory card
OFF
COPY
ON
Sound is output on both "L" and "R" channels in stereo.
Sound from the "L" channel is output.
Sound from the "R" channel is output.
Original and dubbed sounds are combined and output in stereo on
both "L" and "R" channels.
Original sound is output on both "L" and "R" channels in stereo.
Dubbed sound is output on both "L" and "R" channels in stereo.
Refer to "For More Accurate Editing" (
Allows you to set the video recording mode (SP or LP) depending on
your preference. It is recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder during digital dubbing.
( pg. 64)
NOTE:
"REC MODE" can be set when the Power Switch is set to "P" or
"M".
Helps find a blank portion of tape when you want to record from the
middle of a tape. ( pg. 23)
Enables snapshots to be taken during video playback.
Enables dubbing of images recorded on a tape to a memory card.
( pg. 65)
EN
( : Factory-preset)
pg. 77).
51