Video Playback; Normal Playback; Still Playback; Shuttle Search - JVC GR-DVM76 Instructions Manual

22
EN

Normal Playback

Rewind Button (3)
Stop Button
Play/Pause Button (4/9)
(8)
Speaker
Power Zoom Ring
(Speaker Volume
Control)
1
Load a cassette. (
2
Set the VIDEO/MEMORY Switch to "VIDEO".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
To start playback, press 4/9.
5
To stop playback, press 8.
During Stop mode, press 3 to rewind, or
5 to fast-forward the tape.
NOTES:
If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to "OFF", then to "P".
The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
( pg. 24)
You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
" " battery indicator is displayed.
( pg. 100)
• When power is supplied from an AC outlet: the
" " battery indicator does not appear.
• During Stop mode, none of the indications are
displayed.
When a cable is connected to the AV connector,
the sound is not heard from the speaker.
Fast-Forward Button
(5)
VIDEO/MEMORY
Switch
Power Switch
OFF
Lock Button
pg. 16)
To control the speaker volume...
Turn the Power Zoom Ring toward "T" to turn up the
volume, or toward "W" to turn down the volume.

Still Playback

Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
If still playback continues for more than about
3 minutes, the camcorder's Stop mode is
automatically engaged.
When 4/9 is pressed, the image may not
pause immediately while the camcorder
stabilizes the still image.

Shuttle Search

Allows high-speed search in either direction during

video playback.

1) During playback, press 5 for forward search,
or 3 for reverse search.
2) To resume normal playback, press 4/9.
During playback, press and hold 5 or 3.
The search continues as long as you hold the
button. Once you release the button, normal
playback resumes.
A slight mosaic effect appears on the display
during Shuttle Search. This is not a malfunction.
ATTENTION:
During Shuttle Search, parts of
the picture may not be clearly
visible, particularly on the left
side of the screen.

Frame-By-Frame Playback

Allows frame-by-frame search.
1) Engage Still Playback.
2) During Still Playback, rotate the MENU Wheel
toward "+" for forward Frame-By-Frame
Playback, or towards "–" for reverse Frame-By-
Frame Playback.
3) To resume normal playback, press 4/9.
You can also use the provided remote control
for Frame-By-Frame Playback. (
VIDEO PLAYBACK
pg. 68)