Recording Menus; Wipe Or Fader Effects - JVC GR-DVM76 Instructions Manual

40
EN

Wipe Or Fader Effects

These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
( pg. 42) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
VIDEO/MEMORY
MENU
Wheel
Switch
Recording Start/
Stop Button
Power Switch
OFF
Lock Button
Wipe or Fader works when video recording is started
or stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set "v WIPE/FADER" to the desired mode.
( pg. 38)
The selected effect indicator appears.
5
Press the Recording Start/Stop Button to start or
stop recording. The selected Fade-in/out or
Wipe-in/out effect works.
To deactivate the selected effect...
Select "OFF" in step 4.
NOTES:
You can select other effects for "v WIPE/FADER"
during recording.
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.

RECORDING MENUS